digital turbidity probe
WCP-CS7833D Digital Turbidity Probe: Double Beam Infrared
September 9, 2019
low turbidity digital sensor system
WCP-CS7800D Low Turbidity Digital Sensor
September 9, 2019
Show all

WCP-CS7832D Digital Turbidity Probe. Infrared 135° Beam

$1,903.00 exc GST

Available on back-order


The WCP-CS7832D Digital Turbidity Probe communicates with our various turbidity Monitor/Controllers in the WCM-T4000 and WCM-T6000 series. It will also connect to a SCADA system that has a standard Modbus RTU interface plus the supply voltage. This probe has a  dissolved oxygen detection angle of 135° It is used in general applications including rivers, lakes and environmental protection.

Model No. WCP-CS7830D
Power/Outlet 12VDC/RS485 MODBUS RTU
Measure material 135° infrared
Dimensions Diameter 50mm* length 223mm
Housing material POM+316 Stainless steel
Waterproof rating IP68
Measurement range 0.01-400NTU
Lower limit 20NTU
Accuracy <measured value ±5%
Pressure resistance ≤0.3Mpa
Measuring Temperature 0-45℃
Calibration Sample calibration, standard liquid calibration
Cable length Standard 10m cable, can be extended to 100m
Installation thread G3/4
Application General application, river,lake,environmental protection etc.


Additional information
Angle of Coverage

135, 180°, 90°