low turbidity digital sensor system
WCP-CS7801D Low Turbidity Digital Sensor
September 9, 2019
digital turbidity probe
WCP-CS7860D Digital Suspended Solids Probe: Infrared 180° Beam
September 9, 2019
Show all

WCP-CS7850D Digital Suspended Solids Probe: Infrared 90° Beam

$634.00 exc GST

Available on back-order


This suspended solids probe connects to the WCM-T6075 Monitor/controller via its digital communications port. It measures suspended solids in bodies of water with a solids concentration of up to 500mg/l Its infrared beam covers an angle of 90°

Model NO. WCP-CS7850D
Power/Outlet 12VDC/RS485 MODBUS RTU
Measure methods 90°infrared
Dimensions Diameter 50mm* Length 223mm
Shell material POM+316 Stainless Steel
Waterproof grade IP68
Measurement range 0.01-500mg/L
Lower Limit 2mg/L
Accuracy <measured value±2%
Pressure range ≤0.3Mpa
Measuring Temperature 0-45℃
Calibration Standard fluid calibration, water sample calibration
Cable length Standard 10m cable, can be extended to 100m
Installation thread G3/4
Application General applications, rivers, lakes, environmental protection,etc.