WCM-T6000 pH/ORP Monitor/Controller in 144 mm x 144 mm Format
September 12, 2019BTT-CON500 Benchtop Tester for Conductivity, TDS, Salinity and Temperature
September 12, 2019EFM-LDG-W Electromagentic Flowmeters for Water and Waste Water
$1,385.00 – $5,485.00 exc GST
The EFM-LDG series of flowmeters is accurate and we have versions for many applications and different flow rates. Call us to talk about your particular requirements, which lining material to use and the type of electrodes.
The EFM-LDG-W series are suited to water and waste water. The lining is PTFE and the electrodes are stainless steel.
Please note:Electromagnetic flow meters are used to measure the flow of conductive liquid. The measurement side has to be set up correctly at the time of configuring the meter, for best performance, so we need to know the details of the application
- Features
- High degree of accuracy
- Extremely simple operation
- Self diagnosis for empty pipe Detection
- Nominal pressure: PN 10, 16, 40
- Process connection: Flange/clamp etc
- Lining:PTFE.
- Electrodes are stainless steel
- Pulse, 4-20 mA, RS485 or HART
Principle
The measurement principle of magnetic flowmeters can be described as follows:
when the liquid goes through the pipe at the flow rate of v with a diameter D, within
which a magnetic flux density of B is created by an exciting coil, the following
electromotive E is generated in proportion to flow speed v:
- Technical Specifications for Model Number EFM-LDG-W
- Flow direction: Right Left
- Accuracy: 0.5%
- Repeatability: 0.2%
- Nominal width range: DN 10 to 1200 (3/8″ to 48″)
- Housing material: Carbon steel
- Process connection: Flange
- Nominal pressure:
- DN15-DN50, PN<4.0MPA
- DN65-DN150 ,PN<1.6MPA
- DN200-DN400, PN<1.0MPA
- Response time: 0.02 s
- Lining Material and maximum medium temperature:
- PTFE: 120℃
- Electrodes 316L,
- Process connection material: stainless steel
- Protection level: IP65
- Display: Graphical display
- Flow Units: L、m、Kg、t
- Flow Rate Time base: per s、per min、per h
- Cable length: 10 m (standard)
- Power supply 100-240 VAC 24 VDC
- Transmitter Outputs:
- 4-20mA,
- pulse,
- RS485,
- 4-20mA with Hart protocol
- Minimum Medium Conductivity:
- > 5 μS/cm
- 20 μS/cm for demineralized water
- ATEX: No
Pipe Size | DN100, DN125, DN15, DN150, DN20, DN200, DN25, DN250, DN300, DN32, DN350, DN40, DN400, DN50, DN65, DN80 |
---|